EZY FIT Heated Towel Rail – Round Tube – Dual Wired – (W900mm x H920mm) – Brushed Nickel



This Aguzzo Stainless Steel Heated Towel Rail has round bars and modern rectangular wall brackets. Its 900mm width is perfect for bigger bathrooms and walls. The 8 horizontal bars provide plenty of hanging room and high heat contact so towels are warm and dry in minimal time. Unlike lightweight and lower grade steel heated rails, Aguzzo rails are made from thick heavy-duty stainless steel. This provides a more durable product and heat retention is much better due to the thicker steel. The luxury Brushed Nickel Finish is achieved by hand brushing the stainless steel surface and applying a specialist durable clear protective coat to provide a smooth feel. This finish perfectly matches the Brushed Nickel Finish of contemporary designer bathroom tapware. CONTEMPORARY- Round bars with clean straight lines that complement any round style bathware ranges SPACIOUS – 900mm wide, plenty of storage with 8 heated bars CONCEALED WIRING OR PLUG-IN – Plug-in or wire to a wall switch or programmable timer (sold separately) EASY INSTALL – Ezy Fit installation plugs on both left and right for easy installation in all positions EFFICIENT – Only 110 watts power consumption HIGH SURFACE AREA – With 10 horizontal bars your towels will warm fast FULL STAINLESS STEEL – Aguzzo rails are 100% stainless steel for full durability and lifelong use. There is no brass or plastic. FULLY WELDED – Vertical ends are fully closed and welded perfectly. Unlike other brands that close tube ends with plastic end caps. SAFE – Full electrical safety compliance and licensing with AS/NZ: 60335 and c-tick requirements. BRUSHED NICKEL FINISH – Achieved by hand brushing the stainless steel surface and then applying a hard-wearing clear protective coat to provide a smooth feel to the touch WATERPROOF – IPX5 rated to withstand water sprays – a great choice for the bathroom Key specifications Dimensions: 900mm width; 920mm height; 110mm depth (from wall) Rails: Vertical tubes are Ø30mm, Horizontal rails are Ø17mm Power: 240V – 110 watts. Includes 1.5m black power cord and plug Control: Can be plugged in or controlled by a wall switch or programmable timer (sold separately) Construction – 100% heavy-duty Stainless Steel tubing. No brass or plastic. Fully welded – superior strength from fully welded joints and welded closed tube ends. No plastic end caps. Wiring: Plug-in or concealed wiring. Dual wired on the left and right side for simple installation Surface temperature: up to 55º C (uncovered) Water-proof rating: IPX5 (independently tested to withstand water sprays and splashes) Compliance: Electrical safety standards AS/NZ 60335 and C-tick